EBMX XLB-60 MOTOR, X-9000 CONTROLLER KIT, AND 72v 57ah BATTERY BUNDLE

OVERVIEW

Please be aware that the EBMX XLB-60 Motor is not compatible with stock or most aftermarket bash plates (SXS Bash Plates are the only aftermarket Bash Plates which we have tested that will fit).

35KW rated and tested, designed from the ground up to handle the heat, 180C rated windings with U42H magnets

Custom IPM rotor design and industry leading 1mm rotor air gap revving out to rated 13000RPM. Encoder based motor control for increased low end torque response and smooth predicable power delivery.

We built these motors to stay cool under race conditions to ensure you focus on your riding and not your motor temperatures. It doesn’t matter if you are on the track, street or local trail, if you want the best, then this motor is for you.

The EBMX motor range has been specifically designed to surpass the performance of other motors in their classes.

In contrast to many of our competitors who utilize hall sensors, we have opted to incorporate encoder sensors in our motors. This decision stems from the fact that encoder sensors demonstrate greater stability under demanding riding conditions. While hall sensors rely on estimated rotor positions, encoder sensors consistently provide precise angle measurements of the rotor’s position. Hall sensors are typically employed for tracking motor position during start-up and up to approximately 2000 rpm, after which the motor operates in a “sensorless” manner. However, during intense riding situations such as wheel spinning and sudden deceleration combined with rapid throttle adjustments, hall sensors angle detection can result in substantial current spikes in the controller. This can pose significant issues for many controllers, leading to tripping and loss of throttle power, although this is less prevalent in the X-9000.

Encoder sensors, on the other hand, are capable of tracking motor position at all speeds and do so more frequently than hall sensors. As a result they can deliver a smoother more responsive and controllable powerband and they do not generate the same type of current spikes that often cause controller issues. Furthermore, they contribute to improved low-end torque control and overall motor response.

EBMX motor have been custom built and are finely tuned to work with the EBMX X-9000 controller. These motors will work with many other types of controllers, however they may require you to do your own custom tuning

Our new motors have been engineered for performance enthusiasts and experienced riders in controlled environments. These motors are significantly faster than standard motors, and their extreme speed can pose serious risks if not handled with caution.

IMPORTANT SAFETY CONSIDERATIONS:

1. NOT INTENDED FOR ROAD USE: EBMX Motors are NOT designed for use on public roads or crowded areas. These motors are strictly meant for off-road use and controlled environments only.
2. EXPERIENCED RIDERS ONLY: These high-performance motors are recommended for experienced riders who possess the necessary skills and expertise to handle powerful machines. Novice riders are strongly advised against using our motors.
3. USE WITH CAUTION: The enhanced speed and power of our motors require extreme care and attentiveness. Always exercise caution and be aware of your surroundings when operating our products.
4. UPGRADE SAFETY EQUIPMENT: It is crucial to ensure that your bike is equipped with upgraded brakes and other safety features capable of handling the increased speed and power provided by our motors. Using the motor with stock brakes or inadequate safety measures may result in accidents and severe injuries.
5. ADHERE TO LOCAL LAWS: Familiarize yourself with local regulations and laws pertaining to off-road vehicle usage in your area. Always ride within designated areas and private tracks that allow for safe operation.
6. KEEP AWAY FROM CHILDREN: Our motors are not toys, and they must be kept out of reach of children. Never allow minors or inexperienced individuals to operate these motors.
7. RIDE RESPONSIBLY: Ensure that you are in a sound state of mind and not under the influence of any substances that could impair your judgment before operating the motor.

By purchasing and using EBMX Motors products, you acknowledge and understand the inherent risks associated with high-speed off-road motor use. EBMX shall not be liable for any injuries, accidents, damages, or losses incurred as a result of improper usage, negligence, or failure to adhere to this disclaimer.

Enjoy the thrill of our motors responsibly and with safety as your utmost priority.

X-9000 POWER KIT

ENHANCE YOUR ELECTRIC RIDE

The X-9000 Power Kit is compatible with a range of Electric Motorcycles and a range of Motors.

At present we sell a plug and play kit for the following Electric Motorcycles:

• SurRon Light Bee
• SurRon Ultra Bee
• Talaria Sting

The Kit you purchase from us will contain in your X-9000 Box all parts needed for an OEM Replacement with the X-9000.

This Kit is a direct bolt in for the SurRon Light Bee and Talaria Sting bikes with no extra brackets needed, no phase wire extensions or other additional parts (harness adapter included). 

The current list of Motors that the X-9000 is compatible with is below:

• OEM SurRon Light Bee
• OEM SurRon Ultra Bee
• OEM Talaria Sting
• KO RS SurRon
• KO F Spec SurRon
• KO RS Talaria
• KO F Spec Talaria
• QS138 – 90H water cooled

We are currently tuning the following Motors and will update the above list as each motor is fully tested and available to choose on the EBMX app.

• EBMX 35kW SurRon Ultra Bee (Pre-Order Date 1 July)
• EBMX 35kW SurRon Light Bee (Pre-Order Date 1 July)
• Apollo RFN
• ME1803 water cooled
• QS138 V3 gear reduction model
• QS Braaap Moto E Hub Motor

EBMX Xtreme Electric Mods combine strenuous in-house R&D and collaborations with industry experts to bring you the ultimate Electric Motor Controller.
The X-9000 has been purpose built with dirt bike riders in mind.

Using components sourced from reputable suppliers, each item has been engineered for peak performance, from the CNC machined internals and bus bars, injection moulded cover to the fully waterproof construction.

Whether you are trying to nail a wheelie, riding hard enduro, competing in a race series, commuting to work, or just cruising the trails with your family the X-9000 is built to give you ultimate freedom and control.

• Custom EBMX App for tuning and full control (Available free in the App Store and Google Play Store)
• Multiple power modes and full adjustment in each mode
• Adjustable speed limits for different ride modes
• Customizable dashboard to set the display up how you want
• Built in and programmable DC/DC Converter with 4 programmable 12v outputs for running a coolant pump, headlights and other 12v accessories as required and controllable through the app.
• Air-cooled heatsink as standard (comes in black, blue, red or gold). The option of a water-cooled heatsink for high powered builds is available.
• Wiring harness connections are fully sealed and come straight out of the controller with fully waterproof IP67 rated connectors for the harnesses.
• Direct bolt in for the SurRon Light Bee and Talaria Sting bikes with no extra brackets needed, no phase wire extensions or other additional parts (harness adapter included).
• Integration with both SurRon hall-based motors and Talaria encoder motors

SW102 (EggRider) Display included and custom firmware to allow monitoring of motor temp, controller temp along with all of the regular display info.

Can be setup with a smart phone for the display or to check info as desired

Super heavy-duty construction internally and externally to sustain hard riding and high-powered batteries and motors.

EBMX 72V 57AH BATTERY

EBMX Battery Upgrades

Our batteries will get you more range than the OEM SurRon / Talaria battery. This range is limited by how hard the throttle is twisted, riding conditions, and other related factors. All batteries come with a two year warranty and can be delivered worldwide.

About EBMX SurRon and Talaria Batteries:

• 60v batteries work with the SurRon / Talaria OEM controller if you are looking for more range and no additional power.
• 60v batteries will charge with the OEM charger.
• 72v batteries are optimised for more power and are best for harder riding, the higher voltage works to keep the motor cooler.
• 72v batteries need an EBMX charger to pair with them. The charger is set at 15amps for North America and 20amps globally, made specifically for your country / origin mains and power plug.
• The 72v and 60v batteries all pair perfectly with the EBMX X–9000 after market controller solution for up to 15kW of power with the SurRon / Talaria OEM motor. Note: All of our batteries are tested to 18kW for peak power.
• The 72v and 60v SurRon Batteries needs to be paired with seat extenders and the EBMX designed Seat Extenders work perfectly with this battery.
• The 72v and 60v Talaria Batteries are a little too large to fit within the OEM space, so EBMX provides you with a replacement part. Your choice of a Seat Extender or a 3D Printed Battery Cover.